Graph-tech Ghost Acoustic MIDI Instrukcja Użytkownika Pobierz pdf (Strona 16)

Installing Hexpander & 13-pin jack

For instruments with solid-wood sides, reinforce the

area where you are going to cut the hole for the 13-pin

jack by gluing a small piece of 3/32” aircraft plywood

inside the guitar. This reinforcement protects against

cracking the wood, and makes the 13-pin jack stron-

ger in case you step on your cable. Aircraft plywood is

available at most hobby shops, and can be stuck on us-

ing regular wood glue (white) or carpenter’s glue (yel-

low). Allow 24 hours to dry before cutting or drilling.

For mounting the Hexpander output on the edge

of the instrument, the integral 13-pin jack requires

If your body depth is large enough, mount the 13-

pin jack plate with the long dimension across the

depth of the side. This will make for a stronger mount

by placing the mounting holes closer to the kerf-

ing. Also, the plate will require less curvature to t.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Brak uwag

Graph-tech Ghost Acoustic MIDI Instrukcja Użytkownika Strona 16